Whatsapp
Posted : Thursday, August 22, 2024 12:48 PM
REGENT AEROSPACE CORPORATION
POSITION DESCRIPTION:
JOB TITLE: Design / Certification Engineer.
FLSA STATUS: Exempt.
REPORTS TO: Director of Engineering.
The following description is not intended as an exhaustive list of all responsibilities, duties and skills required of personnel so classified.
Management retains the discretion to add to or change the duties of the position at any time.
Summary: Prepares working plans, detailed drawings and complete mechanical or electrical drawings of components and assemblies from notes, verbal instructions, and rough or details sketches for engineering or manufacturing purposes.
Develops efficient and accurate certification approaches for 14 CFR part 145 aircraft modifications.
JOB FUNCTIONS: Makes final sketch of proposed drawings, parts lists, checking dimension of parts, materials to be used, relation of one part to another and relation of various parts to whole structure or project.
Utilizes knowledge of various machines, engineering practices, mathematics, building materials and other physical sciences to complete drawings.
Makes any adjustments or changes necessary or desires.
Modifies existing documentation per Engineering Change Orders (ECO’s).
Draws charts for presentations of statistical data.
Draws finished designs from sketches.
Selects suitable materials and finishes.
Uses AutoCAD and SolidWorks software.
Makes engineering computations, writes specifications, and makes adjustments in drawings of specification.
Prepares design releases to manufacturing.
Verifies completed work, checking dimensions, materials to be used, and quantities.
Assists engineers in development of complex drawings involving some individual creativeness, application of advanced drafting techniques and knowledge of practical, mechanical and fabrication problems.
Develop well organized project proposals, project specific certification plans and project schedules Assist in the preparation and of FAA certification documents such as flammability / fire-block reports, structural substantiation reports and interface loads analysis.
Accurately define aircraft modification compliance requirements of 14 CFR parts 145, 25 and 121.
Logically define project documentation structure As necessary, performs other related duties of which the above are representative.
*Management must contact Human Resources department if adding to or changing a significant number of duties.
JOB REQUIREMENTS: Specifications of Education and Training, Job Related Experience, and knowledge/abilities are general guidelines based on the minimum experience normally considered essential to the satisfactory performances of this job by the average incumbent.
Individual abilities may result in some deviation from these guidelines.
MINIMUM EDUCATION AND TRAINING: College level education highly desirable with specialized instruction in drafting principles/techniques.
Degree in Mechanical Engineering and plus.
MINIMUM DIRECTLY RELATED JOB EXPERIENCE: Four years related experience in technical, manufacturing environment.
MINIMUM KNOWLEDGE, ABILITIES, AND SKILLS: Knowledge of electro-mechanical drafting work.
High mechanical aptitude Ability to read schematics and blueprints.
Knowledge of AutoCAD and Solidworks software Knowledge of technical supervision techniques.
Knowledge of quality control.
Knowledge of project management techniques.
Knowledge of estimating methods Knowledge of Manufacturing Engineering.
Ability to take calculated risks based on sound judgment.
Ability to conduct major research projects.
Ability to create and apply complex equipment.
Ability to establish procedures.
Ability to work in a production oriented environment.
Ability to work under frequently changing priorities.
Ability to select and evaluate materials.
Able to read and comprehend documentation written in the English language.
Problem solving and decision-making skills.
PHYSICAL MOTION: Sits at least 75% of each work day.
Other Motions: Standing walking; Bending; carry-reaching above; sitting; repetitive motion hand-wrist; repetitive motion elbow-shoulder; fingering; grasping; feeling; hearing; talking; seeing; eye-hand/foot coordination; working with controls.
DEGREE OF PHYSICAL ACTIVITY: Sedentary work: Moderate walking or standing or moving light objects.
Exerting up to 10 pounds of force occasionally and almost no amount of force frequently.
VISUAL DEMANDS: Depth perception Color perception Spatial perception MENTAL PROCESS: Advising; Instructing; Creativity.
Decision-making; Analyzing; Initiative.
Judgment; Imagination; Problem Solving.
Remembering; Using mathematics; Reasoning.
Scheduling; Writing; Planning.
WORK ENVIRONMENT: Inside work Noise Vibration EQUIPMENT: Precision test and inspection tools/instruments.
Non-precision tool/instruments.
Computer hardware.
Computer software, i.
e.
, Microsoft Office: Word, Excel, PowerPoint, Access.
Engineering software, i.
e.
, SolidWorks and/or AutoCAD Mechanical.
FLSA STATUS: Exempt.
REPORTS TO: Director of Engineering.
The following description is not intended as an exhaustive list of all responsibilities, duties and skills required of personnel so classified.
Management retains the discretion to add to or change the duties of the position at any time.
Summary: Prepares working plans, detailed drawings and complete mechanical or electrical drawings of components and assemblies from notes, verbal instructions, and rough or details sketches for engineering or manufacturing purposes.
Develops efficient and accurate certification approaches for 14 CFR part 145 aircraft modifications.
JOB FUNCTIONS: Makes final sketch of proposed drawings, parts lists, checking dimension of parts, materials to be used, relation of one part to another and relation of various parts to whole structure or project.
Utilizes knowledge of various machines, engineering practices, mathematics, building materials and other physical sciences to complete drawings.
Makes any adjustments or changes necessary or desires.
Modifies existing documentation per Engineering Change Orders (ECO’s).
Draws charts for presentations of statistical data.
Draws finished designs from sketches.
Selects suitable materials and finishes.
Uses AutoCAD and SolidWorks software.
Makes engineering computations, writes specifications, and makes adjustments in drawings of specification.
Prepares design releases to manufacturing.
Verifies completed work, checking dimensions, materials to be used, and quantities.
Assists engineers in development of complex drawings involving some individual creativeness, application of advanced drafting techniques and knowledge of practical, mechanical and fabrication problems.
Develop well organized project proposals, project specific certification plans and project schedules Assist in the preparation and of FAA certification documents such as flammability / fire-block reports, structural substantiation reports and interface loads analysis.
Accurately define aircraft modification compliance requirements of 14 CFR parts 145, 25 and 121.
Logically define project documentation structure As necessary, performs other related duties of which the above are representative.
*Management must contact Human Resources department if adding to or changing a significant number of duties.
JOB REQUIREMENTS: Specifications of Education and Training, Job Related Experience, and knowledge/abilities are general guidelines based on the minimum experience normally considered essential to the satisfactory performances of this job by the average incumbent.
Individual abilities may result in some deviation from these guidelines.
MINIMUM EDUCATION AND TRAINING: College level education highly desirable with specialized instruction in drafting principles/techniques.
Degree in Mechanical Engineering and plus.
MINIMUM DIRECTLY RELATED JOB EXPERIENCE: Four years related experience in technical, manufacturing environment.
MINIMUM KNOWLEDGE, ABILITIES, AND SKILLS: Knowledge of electro-mechanical drafting work.
High mechanical aptitude Ability to read schematics and blueprints.
Knowledge of AutoCAD and Solidworks software Knowledge of technical supervision techniques.
Knowledge of quality control.
Knowledge of project management techniques.
Knowledge of estimating methods Knowledge of Manufacturing Engineering.
Ability to take calculated risks based on sound judgment.
Ability to conduct major research projects.
Ability to create and apply complex equipment.
Ability to establish procedures.
Ability to work in a production oriented environment.
Ability to work under frequently changing priorities.
Ability to select and evaluate materials.
Able to read and comprehend documentation written in the English language.
Problem solving and decision-making skills.
PHYSICAL MOTION: Sits at least 75% of each work day.
Other Motions: Standing walking; Bending; carry-reaching above; sitting; repetitive motion hand-wrist; repetitive motion elbow-shoulder; fingering; grasping; feeling; hearing; talking; seeing; eye-hand/foot coordination; working with controls.
DEGREE OF PHYSICAL ACTIVITY: Sedentary work: Moderate walking or standing or moving light objects.
Exerting up to 10 pounds of force occasionally and almost no amount of force frequently.
VISUAL DEMANDS: Depth perception Color perception Spatial perception MENTAL PROCESS: Advising; Instructing; Creativity.
Decision-making; Analyzing; Initiative.
Judgment; Imagination; Problem Solving.
Remembering; Using mathematics; Reasoning.
Scheduling; Writing; Planning.
WORK ENVIRONMENT: Inside work Noise Vibration EQUIPMENT: Precision test and inspection tools/instruments.
Non-precision tool/instruments.
Computer hardware.
Computer software, i.
e.
, Microsoft Office: Word, Excel, PowerPoint, Access.
Engineering software, i.
e.
, SolidWorks and/or AutoCAD Mechanical.
• Phone : NA
• Location : Valencia, CA
• Post ID: 9121188942
